17PH4 7.5mm 3MSF Shaft
Spear West is an online spearfishing and free diving store based in Perth, Western Australia, bringing you the best brands at unbeatable prices. Whether it's rock hopping or blue water spearfishing you're interested in, Spear West can provide all the gear and training you need. In stock products can be collected from our warehouse, located in Osborne Park, or can be delivered to you. Although we are not a walk in store, a time can be arranged if you have any questions or wish to inspect or try on any of the gear.
The warehouse is generally unmanned so a telephone call an hour prior to arrival will be required.
The all new Manny Sub 12PH4 7.5mm 3MSF custom spear shafts are superbly finished. The attention to detail needs to be seen to be believed and are among a few shafts on the market that are factory certified for straightness, greatly improving the accuracy of the speargun.
The new floppers are made from hardened stainless steel, 83mm long, 1.3mm thick with a 2.4mm pin welded on each end making them one of the toughest shafts around.
This innovative single flopper 7.5 mm 17-4PH hardened spring stainless shaft also features three unique mini shark fins. The mini shark fins are only 3.5 mm high and will work on any gun with closed or open muzzles.
Welded shark fins deliver ultimate strength to the shaft. Unlike traditional cut out notches, they don’t cause a weak spot. This makes the shaft less likely to break and bend at the notches when fighting big fish.
The back shark fin is welded further back than conventional shafts, giving an extra 5 cm of rubber stretch. Thanks to the position of the last shark fin, two bridles can be overlapped on top of one another on the same shark fin.
This system yields 5 cm extra stretch for the main rubber and 15 cm extra for the second rubber, a total of 20 cm extra rubber stretch when using a double-rubber gun. This significantly increases the velocity and range of the speargun.
The back shark fin comes with a pre-drilled hole as an alternative place for connecting the shooting line. This option makes it suitable for all spearguns with enclosed tracks.
The first shark fin is located in the middle of the shaft, 60 cm from the back. The second shark fin is positioned in the middle between the first and last shark fin. The three mini shark fins make loading a lot easier, especially on roller spearguns and normal spearguns, while at the same time helping to de-power the roller system when shooting smaller fish near the bottom increasing the versatility of the spear gun.
The hardened stainless steel used in the manufacture of these spears has excellent corrosion resistance – the shafts do not rust.
These shafts will suit all European/South African handles